 |
10' Sample Kitchen
Total Price: $2,728.23 + Shipping
Base Cabinets
Base 12"
24" Dishwasher
Sink Base 36"
36" Lazy Susan
30" Slide In Range
Base 18" |
Wall Cabinets
Wall 30" x 30"
(2) Wall 9" x 30"
Diag.l Wall 24" x 30"
Wall 30" x 12"
Wall 18" x 30"
Wall 36" x 12" |
Accessories
Toe Kick Molding
(2) Crown Moldings |
|
|
Wood Construction
Our collection features solid wood for all doors, drawer fronts, and face frames.
Properties of Maple and Stains
Maple is a smooth and closed grained wood that is typically off-white in color with variations of light cherry to deep camel. Maple will turn amber as it ages due to a naturally occurring resin within the wood. All stains and finishes are subject to change overtime as the wood mellows and is exposed to light and other elements. Small mineral streaks are characteristic of this wood, forming as the trees absorb minerals from the earth. This gives cabinet faces a distinct and original appearance. All doors, drawer faces, and face frames are finished according to our 14-step finishing process. All unstained or unpainted maple within the cabinet and drawer boxes is coated with a clear finish to protect the wood from extreme temperatures and excess moisture.
Full Overlay Door Styles
All of our cabinet styles are full overlay cabinets. For full overlay, the door covers the face frame with 1/4" of space on the edge of both sides of the cabinet frame. This means that there is almost no face frame showing around the door and drawer fronts. This style overlay gives the kitchen or bath a clean and seamless design.
Butt Designed Door Fronts
Our double door cabinet boxes have butt doors. Butt cabinet doors close to rest directly against each other, effectively 'butting' together. This type of cabinet closure affords more convenient storage because the cabinet box does not have a center stile between the doors.
Mortise and Tenon Joint Construction
Simple and strong, the mortise and tenon joint has been used by wood craftsmen for centuries to join pieces of wood. This type of joint is typically used with wood pieces that are joined at a 90-degree angle. One end of the two pieces (the tenon) is inserted into a hole (the mortise) in the other piece.
Mitered Joint Construction
Our doors utilize a mitered joint construction for all door frames. The mitered joint is a proper cut angle that is determined so the separate pieces join to meet flush. This joint typically takes place at a 45-degree angle, which makes wide or narrow angle joint construction both easier to implement and stronger.
Five-Piece Door Fronts
The door front construction is a male and female butt system, making a tighter-fitting door that allows a more even stain than using a metal clip or fastener in the door face.
Metal Clip Construction
Our cabinets utilize a metal clip fastener for all box construction. The metal clip, as opposed to nails, screws, and clamps, allows the cabinet boxes to be assembled quickly without the use of numerous tools. The metal clip also provides a long term fastening method that will not breakdown over time such as glue. These clips can be easily removed to allow the cabinet boxes to be customized.
European Hinges
All of our cabinets also include the European Hinge. This hinge has a 35-mm diameter cup press. This cup design keeps the hinge from being reliant on screws as a primary fastener joining the hinge to the door.
Left or Right Single Door Option
All cabinet boxes are pre-fitted with a hanging rail on both the top and bottom of the box allowing the cabinet to be flipped either way. This means that all single boxes can be hung to open either left or right allowing complete customization.
Premium Box Construction
All Covered Bridge cabinet boxes are constructed with a face frame of solid wood that is 3/4" thick and 1-9/16" wide. The sides, back, top, and bottom of the cabinet box are constructed of premium plywood with maple veneer on each side creating a finished exterior and interior of the cabinet box. The back panel and the face frame each have two small grooves to allow for a better fit of each piece and more solid construction.
Solid Wood Drawer Boxes
The sides, back, and front of all drawer boxes are 3/4" solid wood with a clear coat sealer finish. The drawer bottoms are 1/2" plywood that is sealed on both sides to protect the wood from extreme temperature and moisture. This differs from most other drawer boxes that are typically constructed completely with plywood excepting the drawer face.
Standard Half Extension Base Shelving and Full Extension Wall Shelving
All base cabinet shelves are 3/4" thick and are half depth to allow for versatile storage. Wall cabinet shelves are also 3/4" thick with full depth shelving. All shelves are fully adjustable to allow complete storage customization.
Soft-Close Door Bumpers
Each of our doors and drawers come with soft plastic tabs to prevent accidental slamming that could lead to damage of the door and drawer faces and the integrity of the cabinet box itself. These whisper-quiet door bumpers are made from top- level engineered plastics.
Hanging Rails
Each of our cabinets feature a built-in hanging rail made of solid wood. This feature allows for efficient and sturdy installation.
